These Mitsubishi range of full size FDT-VG cassette systems have a host of design features that make installation of the indoor cassette itself a hassle free operation. These cassettes can provide year round climate control to spaces they are installed in. Features include a new thinner design to ensure that they can be installed into the smallest of ceiling voids. All models have a built in condensate pump with a maximum lift of 700mm, allowing flexible routing and the removal of the condensate water produced in cooling mode.
The FDT series start with the FDT40VG model rated at 4KW output up to the largest model the FDT140VG model rated at 14KW. All models have four way air output, with individual flap control on each of the 4 outlet louvers. The hardwired controller supplied has a host of features to tailor the running of the system to your needs.
These systems are
available with a special offer install kit (see the options above) (only up to FDT71VG model) comprising the items below. Alternatively click this link to see our range of full fitting kits.
Flared and insulated copper pipes
Interconnect cable same as flared copper pipes length
2.5 metres condensate drain
Pipe clips and cable ties
Outdoor unit wall bracket or floor blocks (Let us know which you prefer)
Install instructions
This equipment should be installed by personnel holding an FGAS Certificate.
We recommend that you hire our Vacuum Pump Test Rig prior to commissioning the system to test the integrity of the pipework. The Test Rig can also be found in the Fitting Kit section.
We can ship to anywhere in Europe at very competitive prices, and details can be found under ‘Categories – Shipping to Europe’.
These Mitsubishi range of full size FDT-VG cassette systems have a host of design features that make installation of the indoor cassette itself a hassle free operation. These cassettes can provide year round climate control to spaces they are installed in. Features include a new thinner design to ensure that they can be installed into the smallest of ceiling voids. All models have a built in condensate pump with a maximum lift of 700mm, allowing flexible routing and the removal of the condensate water produced in cooling mode.
The FDT series start with the FDT40VG model rated at 4KW output up to the largest model the FDT140VG model rated at 14KW. All models have four way air output, with individual flap control on each of the 4 outlet louvers. The hardwired controller supplied has a host of features to tailor the running of the system to your needs.
These systems are
available with a special offer install kit (see the options above) (only up to FDT71VG model) comprising the items below. Alternatively click this link to see our range of full fitting kits.
Flared and insulated copper pipes
Interconnect cable same as flared copper pipes length
2.5 metres condensate drain
Pipe clips and cable ties
Outdoor unit wall bracket or floor blocks (Let us know which you prefer)
Install instructions
This equipment should be installed by personnel holding an FGAS Certificate.
We recommend that you hire our Vacuum Pump Test Rig prior to commissioning the system to test the integrity of the pipework. The Test Rig can also be found in the Fitting Kit section.
We can ship to anywhere in Europe at very competitive prices, and details can be found under ‘Categories – Shipping to Europe’.
