Call For Advice 0845 026 7796

Mitsubishi SRF Floor Air Conditioning - Heat Pump

Highlights
  • Price includes indoor, outdoor unit + remote controller
  • All Models have weekly timer facilities 
  • "A" rated for energy efficiency
  • Environmentally friendly R410A refrigerant gas
  • 3 year parts warranty
Price£825.00
Mitsubishi SRF Low Wall Mounted Air Conditioning & Heat Pump - Select Model Required:
Qty
Mitsubishi experience, research and development efforts with the SRF-ZMX series low wall mounted full heat pump & air conditioning models have realized the highest COP levels in the industry, and all models clear A class energy efficiency levels by a wide margin in both heating & cooling mode. Indoor units are a totally new design, with optimum balance of air outlet direction and sufficient air flow volume.

These systems have a host of advanced features and functions with intelligent logic to make sure that, in both heating and cooling mode, optimum comfort is achieved for the user.

Heating Operation: In instances where both lower and upper outlets operation with Auto fan speed mode is selected, the lower outlet will be retained for twenty minutes after the start, or until room temperature is close to reaching the setting point. The air outlet will then change to both outlets. That state will be maintained until the switch is turned off. Automatic adjustment of lower air outlet direction prevents stirring up of warm air and keeps optimum comfort at floor level.
 
Cooling Operation: In instances where both lower and upper outlets operation is selected in Cooling or Dry operation, both outlets will be retained for sixty minutes after the start, or until room temperature is below the setting point. The air outlet will then change to the upper outlet. That state will be maintained until the switch is turned off. In instances where both outlets operation with Auto fan speed mode is selected, the upper outlet will be retained for ten minutes after the start, or until room temperature is close to reaching the setting point. The air outlet will then change to both outlets in order to spread comfort air to every corner.

The low wall mounted systems from Mitsubishi offer some of the most energy efficient low wall mounted systems available. These are ideally suited for providing heating and cooling in conservatories.

This equipment should be installed by personnel holding an FGAS Certificate.

We also sell Fitting Kits that contain everything your installation engineer will require to install the system.  These are available in a variety of pipework lengths, and can be found under ‘Categories – Other Aircon Accessories – Fitting Kits’.  The type of Fitting Kit required for each system can be found under the further information below.

We recommend that you hire our Vacuum Pump Test Rig prior to commissioning the system to test the integrity of the pipework. The Test Rig can also be found in the Fitting Kit section.

We can ship to anywhere in Europe at very competitive prices, and details can be found under ‘Categories – Shipping to Europe’.

Further Information

Model No        Pre-Charged to    Fitting Kit
SRF25ZMX-S    15 metres          Kit 1
SRF35ZMX-S    15 metres          Kit 1
SRF50ZMX-S    15 metres          Kit 2


Mitsubishi SRF25ZMX-S floor mounted heat pump

Your shopping cart is empty!

Prices Include VAT

heat pump guide

Mitsubishi SRF Floor Air Conditioning - Heat Pump

Highlights
  • Price includes indoor, outdoor unit + remote controller
  • All Models have weekly timer facilities 
  • "A" rated for energy efficiency
  • Environmentally friendly R410A refrigerant gas
  • 3 year parts warranty
Price£825.00
Mitsubishi SRF Low Wall Mounted Air Conditioning & Heat Pump - Select Model Required:
Qty
Mitsubishi experience, research and development efforts with the SRF-ZMX series low wall mounted full heat pump & air conditioning models have realized the highest COP levels in the industry, and all models clear A class energy efficiency levels by a wide margin in both heating & cooling mode. Indoor units are a totally new design, with optimum balance of air outlet direction and sufficient air flow volume.

These systems have a host of advanced features and functions with intelligent logic to make sure that, in both heating and cooling mode, optimum comfort is achieved for the user.

Heating Operation: In instances where both lower and upper outlets operation with Auto fan speed mode is selected, the lower outlet will be retained for twenty minutes after the start, or until room temperature is close to reaching the setting point. The air outlet will then change to both outlets. That state will be maintained until the switch is turned off. Automatic adjustment of lower air outlet direction prevents stirring up of warm air and keeps optimum comfort at floor level.
 
Cooling Operation: In instances where both lower and upper outlets operation is selected in Cooling or Dry operation, both outlets will be retained for sixty minutes after the start, or until room temperature is below the setting point. The air outlet will then change to the upper outlet. That state will be maintained until the switch is turned off. In instances where both outlets operation with Auto fan speed mode is selected, the upper outlet will be retained for ten minutes after the start, or until room temperature is close to reaching the setting point. The air outlet will then change to both outlets in order to spread comfort air to every corner.

The low wall mounted systems from Mitsubishi offer some of the most energy efficient low wall mounted systems available. These are ideally suited for providing heating and cooling in conservatories.

This equipment should be installed by personnel holding an FGAS Certificate.

We also sell Fitting Kits that contain everything your installation engineer will require to install the system.  These are available in a variety of pipework lengths, and can be found under ‘Categories – Other Aircon Accessories – Fitting Kits’.  The type of Fitting Kit required for each system can be found under the further information below.

We recommend that you hire our Vacuum Pump Test Rig prior to commissioning the system to test the integrity of the pipework. The Test Rig can also be found in the Fitting Kit section.

We can ship to anywhere in Europe at very competitive prices, and details can be found under ‘Categories – Shipping to Europe’.

Further Information

Model No        Pre-Charged to    Fitting Kit
SRF25ZMX-S    15 metres          Kit 1
SRF35ZMX-S    15 metres          Kit 1
SRF50ZMX-S    15 metres          Kit 2


Mitsubishi SRF25ZMX-S floor mounted heat pump